Service +

Case Clean is formulated to remove marks from most plastics, metals and glass. Ideal for use on fan coils, cassette units and boiler cases

Coil-care is an evaporator cleaner which removes bacteria, fungi & viruses, unpleasant odours and improves air quality. Its highly effective cleaning action improves the efficiency  of your air conditioning system and cleans & freshens the coil.

Coil Clean is an effective cleaner, suitable for cleaning evaporators and condensers. This formula is fast acting and fin friendly making it perfect for removing the dirt and not damaging the coil.

Coil Foam is a heavy duty condenser cleaner, this product can be used on air conditioning and refrigeration condenser coils. Effectively removes dirt and grime and works to improve the systems performance.

G2G-Care is an efficient and highly effective indoor coil cleaner combined with a powerful BS/EN approved disinfectant.  Effectively kills MRSA, Legionella and many other germs (see download section for copies of laboratory test reports).

Features:

• Indoor coil cleaner and BS/EN approved disinfectant
• Eliminates slime and contamination
• Protects the coil for up to 6 months
• BS/EN 1276 approved as a bacticide
• BS/EN 1650 approved as a fungicide

G2G Bubble is a spray on leak detector.  It’s high bubbling viscosity makes finding refrigerant leaks fast and easy and it leaves behind minimal residue.  It can be cleaned off with a damp cloth.

Features:

• High bubbling leak detector
• Excellent viscosity
• Clings to surfaces
• Easy to clean up with water
• Easy to use
• Minimum residue

Dirty and contaminated system? We have a unique system and line cleaning solution, ideal for dealing with compressor burn outs, R22 retrofits and equipment upgrades and replacements. Effectively removes all traces of residual oil and contaminants, this easy-to-use kit includes everything needed to quickly and effectively clean the entire system.

Blocked drain line - no problem with our DrainGun™. This lightweight, portable tool is designed to unblock condensate drain lines and other pipework instantly. Simply insert a CO2 cartridge in to the DrainGun and with a press of the trigger, SWOOSH, 800 psi of food grade CO2 blows the blockage out.

Map+ is Propane, Propene and Dimethyl Ether Mixture - a high quality gas for soldering and brazing (for professional use only). Use only with torches designed for MAP GAS. Never use with standard propane appliances such as lanterns, stoves, torches etc.

Cool-Weld ™ is a spray on gel heat shield for soldering, sweating and welding. Ideal for use on filter driers, pipes, valves, sheet metals, etc. Can be used on porous surfaces such as fabrics or drywall. As long as there is some Cool-Weld™ present the surface will resist charring.

All purpose oiler with a 35cm telescoping spout. Zooms out for long shots, and in for short shots, even zooms around corners. Squeeze bottle action. Perfect lubricant for general industrial use. Contains four ounces of finest quality carbon free, rust and oxidation inhibited lubricating oil. Plastic container won’t short out around electrical connections. No leakage.

A one component closed-cell expanding polyurethane foam sealant that is tack free in 20 minutes. Can be painted to prevent UV damage after 12 hours of drying time. Used to seal around doors, windows, pipes, ducts and vents - in fact, virtually anywhere.

A resin-based thread sealant that adheres to internal surfaces and fills voids while forming a fluid tight seal. Sealing from full vacuum up to 10,000 psi, Pro-Tite is specially formulated for use on metals and plastics subject to extreme vibration. Having a temperature range between -73°C to 204°C, Pro-Tite is impervious to most chemicals, including refrigerants, petroleum products, gases, steam etc.

Leak Seek is a leak detection spray designed to locate refrigerant leaks. Suitable for high and low pressure leaks, this formulation is alcohol and solvent free and has long lasting bubbles.

The TIF XP-1A detects all HFC, HFO and HCFC refrigerants, and will find a leak as small as 3 grams per year. Requires 2 x ‘C’ Batteries.

These flaring and swaging tools are designed for most tubing diameters, and they allow you to connect tubes without the need for extra fittings (swage), and preserves the copper malleability (flare) thus preventing cracks and leaks.

G2G-Foam is an alkaline based foaming coil cleaner that produces outstanding results.  Its powerful foaming action ensures that coils are cleaned and brightened effectively.  When rinsed from the coil no salty deposits are left behind which may cause damage the coil.

Features:

• Maximum foaming action to reach embedded dirt
• Cleans and brightens coils
• No salty deposits left on the coil after rinsing

G2G-Green is an environmentally friendly indoor and outdoor coil cleaner. This product uses bio-degradeable, earth-friendly components to quickly clean away dirt and deposits.

This formula delivers outstanding cleaning performance for both indoor and outdoor coils and is safe for all metals and roofing materials.  Pro-Green+ removes dirt and stubborn build-up from coils to restore their appearance and performance. This product also cleans while protecting the environment from harsh chemicals.

Features:

• Made from earth friendly components
• Effective on indoor / outdoor coils
• Non-toxic & non-corrosive
• Pleasant citrus scent

Pro-Universal™ is an NSF food safe registered universal indoor and outdoor coil cleaner, which not only cleans very effectively but also has no detrimental effect on the coils themselves.  Pro-Universal features a special inhibitor that prevents the cleaner from attacking delicate fins. Instead, it concentrates solely on actively breaking down soil and dirt.  It is a non foaming, self rinsing product that not only is coil friendly but is safer for both the user and the environment than many traditional foaming coil cleaners.

Features:

• NSF Registered as food safe
• Non-foaming & Non-corrosive
• Easy to use Pre-Mixed Trigger Pack
• Provides on-going protection for the coil

Fresh Coil is formulated for routine cleaning. The powerful spray delivered by the directional nozzle generates thick foam that genetrates, lifts, suspends and removes dirt, lint and grease from air conditioner and heater coil fins. No rinsing
required on evaporator coil or other surface where condensation causes rinsing action. Breaks down organic odours and blockages. Helps keep drain trays clean and drain lines free flowing.

The build-up of grease on exposed refrigeraton coils in all areas including kitchens will obstruct the air flow and reduce heat transfer. This can cause the system to lose efficiency and increase the running costs. Grease Buster is a solvent based cleaner and degreaser which should be used in well ventilated areas. It dissolves grease quickly and restores the efficiency of the system. The rapid drying formula is non-flammable and non-conductive.

Leak Seek is a leak detection spray designed to locate refrigerant leaks. Suitable for high and low pressure leaks, this formulation is alcohol and solvent free and has long lasting bubbles.

Pro-Care is an efficient and highly effective indoor coil cleaner combined with a powerful BS/EN approved disinfectant.  Effectively kills MRSA, Legionella and many other germs (see download section for copies of laboratory test reports).

Features:

• Indoor coil cleaner and BS/EN approved disinfectant.
• Eliminates slime and contamination.
• Protects the coil for up to 6 months.
• BS/EN 1276 approved as a bacticide.
• BS/EN 1650 approved as a fungicide.
• Mix Ratio – Indoor 8:1

Pro-Clean is an environmentally friendly indoor and outdoor coil cleaner.  It is non toxic, non corrosive, low foaming cleaner that is economical and biodegradable offering an environmentally safer option than many types of coil cleaners.

Features:

• Controlled foaming action so suitable for use with indoor equipment.
• Effective with baked on grease and oils.
• Neutralizes odours found in the air handling equipment.
• Biodegradable and environmentally friendly.
• Mix Ratio: Indoor 6:1

Pro-Cool is an efficient and effective liquid ice machine cleaner that is nickel and metal safe.  It quickly removes soils and minerals and is odourless leaving no unpleasant smells behind.

Features:

• Nickel and metal safe.
• Fast and effective
• Odourless – less rinsing required

Pro-Foam is an alkaline based foaming coil cleaner that produces outstanding results.  Its powerful foaming action ensures that coils are cleaned and brightened effectively.  When rinsed from the coil no salty deposits are left behind which may cause damage the coil.

Features:

• Maximum foaming action to reach embedded dirt.
• Cleans and brightens coils.
• No salty deposits left on the coil after rinsing.
• Mix Ratio 3:1

Pro-Green is an environmentally friendly indoor and outdoor coil cleaner. This product uses bio-degradable, earth-friendly components to quickly clean away dirt and deposits.

This formula delivers outstanding cleaning performance for both indoor and outdoor coils and is safe for all metals and roofing materials.  Pro-Green+ removes dirt and stubborn build-up from coils to restore their appearance and performance. This product also cleans while protecting the environment from harsh chemicals.

Features:

• Made from earth friendly components.
• Effective on indoor / outdoor coils.
• Non-toxic & non-corrosive.
• Pleasant citrus scent.
• Mix Ratio – Condensers 3:1 / Evaporators 6:1

Pro-Scale removes lime scale, slime and algae buildup from heat exchangers, cooling towers, piping and condensers.  Pro-Scale will increase system capacity, efficiency and reduce the head pressure.  This product changes colour when cleaning is complete.

Features:

• Fast and easy to use.
• Improves system efficiency.
• Removes scale, slime and algae build up.

Pro-Universal™ is an NSF food safe registered universal indoor and outdoor coil cleaner, which not only cleans very effectively but also has no detrimental effect on the coils themselves.  Pro-Universal features a special inhibitor that prevents the cleaner from attacking delicate fins. Instead, it concentrates solely on actively breaking down soil and dirt.  It is a non foaming, self rinsing product that not only is coil friendly but is safer for both the user and the environment than many traditional foaming coil cleaners.

Features:

• NSF Registered as food safe.
• Non-foaming & Non-corrosive.
• Economical & Effective.
• Provides on-going protection for the coil.
• Mix Ratio – Indoor 10:1 / Outdoor 6:1

A condenser should work as efficiently as you. These tools make it easy to remove debris and straighten fins.

a unique coil cleaner made from readily biodegradable components derived from natural, sustainable sources that delivers outstanding cleaning performance for both indoor and outdoor coils. Made for air source heat pumps, G2G-HeatPUMP removes dirt and stubborn build-up from coils to restore their appearance and performance.

G2G-HeatPUMP is safe for all metals and rubber roofs. Now you can enjoy the effective cleaning power of G2GHeatPUMP while helping protect the world around you. G2G-HeatPUMP delivers excellent cleaning performance and environmental responsibility.

Imperial HI-DUTY tube cutters have a thrust bearing feed mechanism for the smoothest cutting.

• KCK-M male KWIK coupler adaptor repair kit repairs 2 male couplers
• KCK-F female KWIK coupler adaptor repair kit repairs 5 standard and 5 automotive female couplers (not for 26-c and 27-c)