The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The M8-M10 rubber-lined pipe clamp are suitable for supporting all types of pipework including HVAC, boiler and drain. They come with noise supressing rubber strips: 17dB(A) according to ISO 3822-1.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

SYNTHETIC REFRIGERATION OIL FOR CO2 COMPRESSORS

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

REFRIGERANT RECOVERY MACHINE FROM BOSCH. EXTERNALLY CERTIFIED FOR A1, A2L AND A3 REFRIGERANTS EITH CONFIRMATION NO. 2018/SX/PV/222 

• Recovers all commonly used CFC, HFC, HCFC Refrigerants
• Suitable for A2L Refrigerants such as R32 and R1234YF
• Suitable for A3 Refrigerants such as R290 and R600a
• Oil-less compressor suitable for liquid and vapor
• Fully automatic high & low pressure reset
• Available in 110V and 240V
• 1 year warranty

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

LEAK DETECTOR 

• One sensor, one tool
• Detects Halogenated CFC, HCFC, HFC, HFO compounds, HC refrigerants, Tracer Gas (95 %N2/5 %H2 mixture), ammonia, butane and propane
• Meets or exceeds EN14624 performance standards
• Ultimate Sensitivity of less than 1 g/yr
• Electronic sensor lasts > 5 years
• Large 61 mm backlit graphic LCD
• Audible alarm with Mute and Visual Leak Size Indicator
• Leak tracing mode to pinpoint hard to find leaks
• Rubber keypad provides positive actuation and tactile feedback
• Ergonomic design with TPU overmold and ambidextrous operation
• Includes carrying case, spare filters and battery charger

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

These dairy cabinet supermarket pumps can fit under low display cabinets due to being just 76mm in height. The multiple inlets offer a variety of installation options for the contractor.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

The Hilmor Tool Center Bag is your total tool storage solution. It includes 24 exterior and interior pockets and three zippered pouches so you can store your tools safely and find them quickly.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

The 5.5 metre discharge lift helps with the flexibility of the installation. Suitable for both floor and wall mounting and comes with a quick release check valve. Suitable for boilers up to 200kW this version comes with 6 metres of 9.5mm (3/8”) ID flexible drain hose.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

The portable air conditioners are suitable for offices, computer rooms and light commercial use. The cooling only model is ideal for cooling flats, conservatories or loft conversions during hot summer months. The heat and cool model can be used as an energy efficient form of heating along with cooling. The units come with a hose, tray, remote control and wall kit. Spare parts are available upon request - please enquire for more details.

Cooling only model (PAC-C-12-R290)
Heating and cooling model ((PAC-H-12-R290)

Running pipe work from an externally mounted air source heat pump or biomass boiler into a property requires the pipe work to be run through the exterior wall. The hot pipe work will be affected by cold bridging and heat loss if it is not insulated correctly. MIS 3005 requires external pipe work to be adequately insulated. This kit provides both thermal insulation within the wall and comes complete with an elbow section to cover the external copper pipe connection.

Our insulated 3 and 4 pole rotary enclosed isolators are CE marked and suitable for disconnecting the power supply to outdoor air source heat pump units. They are waterproof to IP65 and easy to install and conform to IEC 60947-3. They have a lockable off position and interlocking cover which can be removed only in the off position. Earth and neutral terminals included and M20/25 knockouts up to 63A.

Flexi Foot With Strut – These feet can support pipework, cable tray, and can also be used to mount air conditioning units, air source heat pumps and a variety of outdoor equipment. Solar thermal and solar photovoltaic on flat roof installations can also be accommodated. Made from heavy duty recycled rubber. The 21x41mm galvanised steel strut is supplied bonded to the rubber. Drain slots are molded to the underside of the foot.